Unoffical Seestar Wiki

Unofficial, Unrelated, Unaffiliated in anyway with ZWO

User Tools

Site Tools

Trace:
definitions

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
definitions [2024/07/23 05:52] – tailspindefinitions [2024/12/31 08:28] (current) – tailspin
Line 6: Line 6:
   * Bias Frames: You don't need this with Seestar. They're extremely short exposures (typically the shortest possible) taken with the lens cap on or the telescope covered. Bias frames capture the read noise, a type of electronic noise that's independent of exposure time, and is present in all images.    * Bias Frames: You don't need this with Seestar. They're extremely short exposures (typically the shortest possible) taken with the lens cap on or the telescope covered. Bias frames capture the read noise, a type of electronic noise that's independent of exposure time, and is present in all images. 
  
-  * Dark Frames: Seestar will automatically create these for you when you start <del>Stargazing</del> DSO imaging. They're images taken with the same exposure time and camera settings as your light frames, but with the lens cap on or the telescope covered. Dark frames capture the thermal noise and other electronic noise inherent in your camera's sensor, which can then be subtracted during image processing. +  * Bortle Scale: A measure of how dark your sky is ranging middle of no where to downtown Tokyo. 
  
-  * Dithering: Seestar does this automatically for you. A technique where the telescope's position is shifted slightly between exposures during image capture. This helps reduce fixed-pattern noise and other artifacts when the images are stacked. .+{{ :bortle_scale.jpg?nolink&600 |}} 
 + 
 +  * Dark Frames: Seestar will automatically create these for you when you start <del>Stargazing</del> DSO imaging. They're images taken with the same exposure time and camera settings as your light frames, but with the path blocked by an opaque filter. Dark frames capture the thermal noise and other electronic noise inherent in your camera's sensor, which can then be subtracted during image processing.  
 + 
 +  * Dithering: Seestar does this automatically for you. A technique where the telescope's position is shifted slightly between exposures during image capture. This helps reduce fixed-pattern noise and other artifacts when the images are stacked. Seestar moves 15 pixels every 10 exposures.
  
   * DSO: Deep Sky Object such a nebulae and galaxies, but also comets, asteroids, quasars, etc.   * DSO: Deep Sky Object such a nebulae and galaxies, but also comets, asteroids, quasars, etc.
    
-  * Equatorial Mount: A type of telescope mount designed to counteract the Earth's rotation by aligning one of its axes with the Earth's rotational axis. This allows for easier tracking of celestial objects. Some people have adapted the Seestar so it can operate in equatorial mode.+  * Equatorial Mount: A type of telescope mount designed to counteract the Earth's rotation by aligning one of its axes with the Earth's rotational axis. This allows for easier tracking of celestial objects. Some people have adapted the Seestar so it can operate in equatorial mode (Google seestar_alp).
  
   * [[field_rotation|Field Rotation]]: The apparent rotation of the field of view in an image caused by the Earth's rotation when using an Alt-Az mount.   * [[field_rotation|Field Rotation]]: The apparent rotation of the field of view in an image caused by the Earth's rotation when using an Alt-Az mount.
Line 20: Line 24:
   * Histogram: A graphical representation of the distribution of pixel brightness values in an image. In astrophotography, histograms are used to assess the exposure levels and dynamic range of an image and to guide adjustments during image processing.   * Histogram: A graphical representation of the distribution of pixel brightness values in an image. In astrophotography, histograms are used to assess the exposure levels and dynamic range of an image and to guide adjustments during image processing.
  
-  * Light Frames: The main images you take of your celestial target during an astrophotography session. These contain the light from the object you're photographing, along with various noise and artifacts. You can tell the Seestar to save these for you in the Settings page.+  * Light Frames: Also known as subframes or just subs, these are the main images you take of your celestial target during an astrophotography session. These contain the light from the object you're photographing, along with various noise and artifacts. You can tell the Seestar to save these for you in the Settings page.
  
   * Mask: A tool used in image processing software to selectively apply adjustments to specific areas of an image. Masks can be created based on brightness, color, or other criteria, allowing you to isolate and enhance specific parts of the image without affecting the rest. Use in post-processing, and not required to capture images with the Seestar.   * Mask: A tool used in image processing software to selectively apply adjustments to specific areas of an image. Masks can be created based on brightness, color, or other criteria, allowing you to isolate and enhance specific parts of the image without affecting the rest. Use in post-processing, and not required to capture images with the Seestar.
  
-  * Mosaic: A large image created by combining multiple overlapping smaller images, typically used to capture wide fields of view that wouldn't fit in a single frame. ZWO has said that the Seestar will soon have that capability.+  * Mosaic: A large image created by combining multiple overlapping smaller images, typically used to capture wide fields of view that wouldn't fit in a single frame. The Seestar has a so-called framing mode that approximates the creation of a mosaic.
  
-  * OTA (Optical Tube Assembly): The main optical component of a telescope, including the lenses or mirrors, tube, and focuser, but excluding the camera, mount, tripod.+  * OTA (Optical Tube Assembly): The main optical component of a telescope, including the lenses or mirrors, tube, and focuser, but usually excluding the camera, mount, tripod. The [[camera|Seestar's camera]] is in the OTA.
  
   * Sub frames: when  the Seestar is <del>enhancing</del> stacking your images in <del>Stargazing</del> DSO Mode, the image is created from sub frames (also called subs). You can save those subs if you tell the Seestar to keep them by turning on the feature in [[settings|Settings]].   * Sub frames: when  the Seestar is <del>enhancing</del> stacking your images in <del>Stargazing</del> DSO Mode, the image is created from sub frames (also called subs). You can save those subs if you tell the Seestar to keep them by turning on the feature in [[settings|Settings]].
definitions.1721739161.txt.gz · Last modified: 2024/07/23 05:52 by tailspin

Page Tools