Unoffical Seestar Wiki

Unofficial, Unrelated, Unaffiliated in anyway with ZWO

User Tools

Site Tools

Trace:
quick_start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
quick_start [2025/03/19 13:28] – [Quick Start] tailspinquick_start [2025/03/22 09:06] (current) – [Tweak Image (Optional)] tailspin
Line 28: Line 28:
 Ensure the connection is secure but not overly tight. Ensure the connection is secure but not overly tight.
  
-Do not extend the tripod legs to ensure stability. If you set it on a table, make sure the table is rock-steady.+Do not extend the tripod legs to ensure stability. If you set it on a table, make sure the table is rock-steady.Do not set it on a table without the tripod as the  bottom of the scope will interfere with rotation 
  
-Check that the tripod is more or less level.+Check that the tripod is more or less level. It doesn't have to be perfect.
  
  
Line 69: Line 69:
 The app will guide you through the process of entering the Seestar's Wi-Fi password, etc. The app will guide you through the process of entering the Seestar's Wi-Fi password, etc.
  
-Later, go back and set up Station Mode. Instead of connecting to the Seestar WiFi hotspot, you'll set up a connection to your home WiFi network. Then you can use your home WiFi to extend your control range and surf the web while using your Seestar.+Later, go back and set up Station Mode. Instead of connecting to the Seestar WiFi hotspot, set up a connection to your home WiFi network. Then you can use your home WiFi to extend your control range, send pictures, use email, and surf the web while using your Seestar.
  
  
Line 77: Line 77:
 A couple of preliminary steps are required the first time you use the scope. Find a level (not just flat) surface, then go to Advanced Setting and tap Level Sensor Calibration, and do as it tells you. Then Tap Compass Calibration and follow those instructions. A couple of preliminary steps are required the first time you use the scope. Find a level (not just flat) surface, then go to Advanced Setting and tap Level Sensor Calibration, and do as it tells you. Then Tap Compass Calibration and follow those instructions.
  
-Its not really calibration, but you probably should not skip Horizontal Calibration, so push the slider to left. Turn on Save Each Frame and Skyatlas Sync if they're off.+It's not really calibration, but you should not skip Horizontal Calibration, so push the slider to left. It checks to see how level the scope is and compensates for any error. 
 + 
 +Turn on Save Each Frame and Skyatlas Sync if they're off.
  
  
Line 89: Line 91:
 Point the Seestar at a scenic object and tap the red button to capture an image Point the Seestar at a scenic object and tap the red button to capture an image
  
-Tap the Auto Focus button and watch the Seestar find the right place.+Tap the Auto Focus button and watch the Seestar find the right setting.
  
-Note that terrestrial and sky objects require different focus. In fact, the Moon and Sun do too. Moral: run autofocus on every object before you start capturing images.+Note that terrestrial and sky objects require a different focus point. In fact, the Moon and Sun do too. Moral: run autofocus on every object before you start capturing images.
  
 Go to settings (Me button, right end of bottom menu) and turn Manual Focus on, then go back to home screen Go to settings (Me button, right end of bottom menu) and turn Manual Focus on, then go back to home screen
Line 121: Line 123:
 ===== Tweak Image (Optional) ===== ===== Tweak Image (Optional) =====
  
-Use the Seestar app or other photo editing software to adjust brightness, contrast, saturation, and other image parameters.+Use the Seestar app or other photo editing software such as AstroEdit (iOS) to adjust brightness, contrast, saturation, and other image parameters.
  
-You can also crop the image or apply filters for creative effects using Lightroom, Photomator, iOS AstroEdit, etc.+You can also crop the image or apply filters for creative effects using Lightroom, Photomator, AstroEdit, etc.
  
  
quick_start.1742416090.txt.gz · Last modified: 2025/03/19 13:28 by tailspin

Page Tools